In Springfield, metal roofing prices typically range from $5.50 to $20 per square foot for installation, depending on the material and complexity, while repairs often start around $450. Several factors influence the final cost, including roof size, material choice, and accessibility, but a professional assessment ensures you get an accurate estimate for your specific project.
Pricing guide
These rates are indicative. Every job is unique: size, access, complexity. Request a free estimate for exact pricing tailored to your situation.
| Service | Price | Details |
|---|---|---|
| Metal Roof Installation | From $8/sq ft | Complete metal roof installation for homes across Springfield and the Ozarks: panel systems engineered for humid summers, spring hail, severe thunderstorm wind and wet winters, installed over high-temperature synthetic underlayment with proper ventilation and careful flashing details for a 40-60 year service life. |
| Standing Seam Metal Roofing | From $10/sq ft | Concealed-fastener standing seam systems, the premium choice for Springfield homes. Panels roll-formed to length and mechanically seamed or snap-locked, with no exposed screws to loosen as Ozark seasonal temperature swings expand and contract the roof every day. Superior wind resistance and a durable low-gloss finish. |
| Metal Roof Replacement | From $9/sq ft | Full tear-off and replacement of hail-battered shingle, worn composition or end-of-life metal roofs: old roofing hauled away, decking inspected and repaired, then a complete new metal system installed. Some insurers offer discounts for impact-rated roofs, so ask yours. |
| Metal Roof Over Shingles (Retrofit) | From $7/sq ft | A new metal roof installed directly over your existing asphalt shingles, with no tear-off, less waste and lower cost. Popular on Springfield brick and frame ranch homes. We check deck condition first and tell you honestly when tear-off is the better call. |
| Metal Roof Repair | From $450 | Repair of damaged, loose or storm-hit metal roofing: replacing hail-dented, loosened or punctured panels, resealing seams and penetrations, and fixing failed flashing before spring storm rain becomes interior damage. |
| Metal Roof Leak Repair | From $450 | Priority leak response for metal roofs: leaks traced to their true source (failed fasteners, seam separation, flashing gaps, pipe boots and chimney and dormer transitions) and fixed right, not just caulked over. Emergency tarping available after spring hailstorms and severe thunderstorms. |
| Screw Replacement & Re-Fastening | From $750 | Springfield's hot, humid summers and cold winters expand and contract metal roofs hundreds of times a year, so screws back out and aged washers crack on older exposed-fastener roofs. Oversized screws and UV-resistant washers fix it for a fraction of replacement cost. |
| Corrugated & Ribbed Panel Roofing | From $5.50/sq ft | Exposed-fastener metal roofing (corrugated, R-panel and 5V), the budget-friendly workhorse for homes, carports, barns and workshops across Greene County and the Ozarks. Quality panels in reflective cool-roof colors, installed with proper screw patterns and closures that keep out wind-driven rain and oak leaves. |
| Metal Shingle Roofing | From $9/sq ft | Metal shingles that deliver the look of architectural shingles, slate or shake with the lifespan of steel, a favorite for Springfield homeowners who want metal performance without the standing seam look. Lightweight, walkable and wind-rated for spring thunderstorm gusts. |
| Stone-Coated Steel Roofing | From $9/sq ft | Stone-coated steel systems combining steel strength with a textured traditional finish: excellent hail and wind performance, Class A fire rating, and profiles that mimic the cedar shake and slate looks common on Springfield homes. |
| Copper & Specialty Metal Roofing | From $20/sq ft | Copper, zinc and aluminum roofing for accents, porches, bay windows and full architectural roofs: premium metals that develop a living patina and last a century in the humid Ozark air. Custom fabrication for the fine details. |
| Metal Roof Coating & Painting | From $2.50/sq ft | Restoration of sun-faded, chalking or surface-rusted metal roofs: surface prep, rust treatment and high-performance protective coating systems that extend roof life 10-15 years, restore color and cut summer heat gain without replacement. |
| Flashing, Chimney & Skylight Repair | From $600 | Repair and custom fabrication of flashing around chimneys, skylights, valleys, dormers and brick transitions, the number one leak point on Springfield roofs. In-house bent flashing for a precise watertight fit. |
| Snow Guards & Ice Protection | From $1,200 | Edge, ridge and wind-uplift reinforcement for metal roofs: extra fastening and heavier edge metal where Ozark thunderstorm wind and hail hit hardest, plus retention guards above entries and walkways for the rare winter ice that sheds in one slide. Honest guidance on what your roof actually needs. |
| Storm & Wind Damage Repair | Free inspection | Repair of hail, wind and severe thunderstorm damage to metal roofing: thorough documentation with photos, honest assessment of repair vs. replacement, and help documenting your insurance claim from inspection to completed work. |
| Metal Roof Inspection | Free estimate | Complete metal roof inspections for homeowners, buyers and insurance requirements: fastener condition, seam integrity, flashing, coating and hail and UV wear, and a straight answer on remaining service life with a written report. |
| Gutters for Metal Roofs | From $9/linear ft | Seamless gutter systems sized and mounted correctly for metal roofing: hangers that work with panel profiles and downspouts that carry sudden spring cloudbursts away from brick walls and foundations, with details that handle oak leaves, hickory nuts and cedar debris. |
| Commercial & Agricultural Metal Roofing | Free estimate | Metal roofing for barns, poultry and cattle-farm buildings, workshops, churches, carports and light commercial buildings across Greene County and the surrounding Ozarks: from farm buildings around Strafford and Marshfield to shops near Cherry Street, with durable panel systems, insulation options and repairs. |
What Affects the Price
- Roof size and complexity : Larger roofs require more materials and labor, and complex designs with multiple slopes, valleys, or penetrations increase installation time and cost.
- Material type and gauge : Materials like copper or stone-coated steel cost more than corrugated panels, and thicker gauges or specialty finishes add to the price.
- Accessibility and roof height : Steep roofs, multi-story homes, or limited access can require additional safety measures and equipment, raising labor costs.
- Condition of existing roof : If removal of old roofing or structural repairs are needed, this adds to the overall cost. Retrofit over shingles may save on disposal fees.
What's included
- Travel included across the Springfield area
- Professional labor & equipment
- Old roofing tear-off & haul-away
- Job site cleanup
- Written estimate before work begins
To get an accurate estimate, have your roof's approximate square footage, pitch, and material preference ready when you call Springfield Metal Roofing at (417) 815-6442. Their free estimate includes a thorough inspection and a detailed quote covering materials, labor, and disposal, so you know exactly what to expect. Prepare any questions about warranties and timelines to make the most of your consultation.
Pricing FAQ
Why do metal roofing prices vary so much?
Prices vary based on material type (e.g., corrugated steel vs. copper), roof complexity, labor rates, and additional services like old roof removal. For instance, corrugated panel roofing starts at $5.50 per square foot, while copper specialty roofing starts at $20 per square foot.
Do you offer free estimates?
Yes, Springfield Metal Roofing provides free inspections and estimates for most services, including storm damage repair and commercial projects. Call (417) 815-6442 to schedule your appointment.
What payment methods do you accept?
They accept cash, checks, and major credit cards. Financing options may be available for larger projects; ask for details during your estimate.