Serving the Springfield area  ·  (417) 815-6442  ·  Open Mon-Sun 7am-7pm
📞 (417) 815-6442 Free Quote

Metal Roofing in Willard, MO (65781) · Local Professionals

Springfield Metal Roofing · Fast response in Willard and the Springfield area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+196Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Willard is a small town where the lots are wide, the trucks are big, and a lot of roofs are still the original corrugated panels from the 1980s and 90s. If you live off Highway 160 or down a gravel road near Willard High School, you already know that hail and wind don't treat a farm shop roof any different than a house on Main Street.

We are Springfield Metal Roofing, and we work Willard (65781) every week. From the older homes near Willard City Park to the newer builds on the north side toward Springfield, we see the same problems: loose fasteners, rusted screw lines, and panels that have been peeled back by one too many spring storms. We fix those, and we install new metal roofs that are built for the Ozarks.

Metal Roofing in Willard (65781)

Willard sits on the Springfield Plateau, same thin rocky clay over limestone as the rest of Greene County. That means a few things for your roof. First, the ground drains fast in some spots and holds water in others, so we pay attention to where your downspouts run and how the grade sits around the foundation. Second, the wind here comes across open fields and hits the west and north slopes hard. We see more wind-lifted panels on the edge of town than in the middle, simply because there is nothing to break the gust. And third, a lot of Willard properties have outbuildings, barns, or shops that were roofed with corrugated panels years ago. Those panels are fine until the fasteners back out or the washers dry rot. That is when you get leaks that show up as a wet spot on a tractor or a stain on the ceiling.

Our team has worked on everything from small ranch homes off Highway 160 to metal shops on the farm lots north of town. We know what holds up here and what doesn't.

Our services in Willard

How a Job Works in Willard

Step 1: You call us at (417) 815-6442 or send a message. We set up a free on-site assessment, usually within a couple of days. We get up on the roof, check the panels, fasteners, flashing, and penetrations, and take photos. If it is a repair, we tell you what failed and what it will take to fix it. If it is a replacement, we measure and give you a written estimate with options.

Step 2: Once you approve, we pull the permit with the City of Willard if one is required. We schedule the work around the weather, which in spring means watching the radar. On tight lots or older properties with mature trees, we plan where to stage materials and how to get the panels to the roof without tearing up your yard. If your neighborhood has an HOA or you are in a historic district, we help you get the color and profile approved before we order anything.

Step 3: We clean up every day and do a final walkthrough with you. We magnet-sweep for screws and nails, haul off the old material, and make sure you know how to reach us if anything comes up after we leave. We leave your property clean.

Pricing in Willard is straightforward. Metal roof repair starts at $450 for a typical leak or flashing fix. Screw replacement and re-fastening starts at $750, which is common on older corrugated roofs. A full metal roof installation starts at $8 per square foot, standing seam starts at $10 per square foot, and metal roof replacement starts at $9 per square foot. If you are going over existing shingles, retrofit starts at $7 per square foot. Corrugated and ribbed panel roofing starts at $5.50 per square foot, which is often the right call for a barn or shop. The final number depends on the size of the roof, how steep it is, how many layers are already there, and how easy it is to get to. Call (417) 815-6442 for a free estimate.

My barn north of Willard has old corrugated panels with rusted screws. Can you just replace the screws or do I need a whole new roof?
Often we can replace the screws and washers and get several more years out of the panels, as long as the metal itself is not rusted through. We start at $750 for screw replacement and re-fastening. If the panels are too far gone, we will tell you straight and give you a price on new corrugated panels.
A storm just peeled back some panels on my house near Willard High School. How fast can you get out there?
We prioritize storm damage calls. Call (417) 815-6442 and we will get an inspection scheduled as soon as possible, often same day or next day. We can tarp or secure the roof to prevent further water damage while we work up the repair estimate.
What does a metal roof cost for a typical three-bedroom ranch in Willard?
For a standard ranch, most homeowners are looking at somewhere between $8 and $10 per square foot for installation, depending on the panel type and roof complexity. A 1,500 square foot roof might land in the $12,000 to $15,000 range. We give free estimates so you get a real number for your specific roof.
Do I need a permit from the City of Willard to replace my roof?
In most cases, yes, a roofing permit is required for a full replacement. The City of Willard handles permits and inspections, and the rules can vary depending on the scope of work. We pull the permit for you and make sure the job is inspected properly. If you are in an unincorporated part of Greene County, the county rules apply instead.
My neighbor says my new metal roof will send water onto their property. What are the rules on that in Willard?
Missouri follows the common law rule that you cannot redirect water onto a neighbor's property in a way that causes damage. We design gutters and downspouts to discharge on your own property, and we can adjust the layout if there is a concern. If you have an HOA, check the covenants for any rules about drainage or roof color before we order materials.
Are you insured for work on my property in Willard?
Yes. We carry general liability insurance and workers' compensation coverage.
What should I do to maintain my metal roof in Willard between hail seasons?
Keep the gutters clear, especially in the fall when leaves from the oak and hickory trees around town drop. Check the fasteners on older corrugated roofs once a year, since the freeze-thaw cycle here can loosen the washers. And after a big hail storm, have us take a look. Small dents are usually cosmetic, but damaged fasteners and seals are not. A free inspection is the easiest way to catch a problem early.
Why choose us?

Trusted professionals in Springfield

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Springfield

All your work handled by qualified professionals in Springfield

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

196+ Verified Client Reviews in Springfield

⭐⭐⭐⭐⭐ 4.9/5 · 196 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Springfield · Response within 24h · No commitment · ☎ (417) 815-6442

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Springfield ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm