Licensed & Insured, in Springfield and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Springfield
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (417) 815-6442 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Springfield and surrounding areas · On-site visits included · Free estimate within 24h
Springfield Metal Roofing is a team of local certified professionals based in Springfield. We respond quickly in Springfield and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (417) 815-6442⭐⭐⭐⭐⭐ 4.9/5 · 196 verified Google reviews
“We needed a metal roof on a rural hangar building out past Willard and these guys handled the whole thing. The crew of four knocked it out in three days and the panel lines are dead straight. Way easier to deal with than I expected.”
Commercial Metal Roofing
“Had the porch roof redone in copper and it looks incredible, the seams are clean and they took real care with the flashing around the house wall. Took about a week longer than quoted, but honestly the finished result is worth it.”
Copper & Specialty Metal Roofing
“Our old red farmhouse roof was rusted through in spots and Springfield Metal Roofing replaced the whole thing with new metal panels. They stripped it down to the deck, cleaned up every last screw and scrap, and the barn-red finish matches the property perfectly.”
Metal Roof Replacement
“Full standing seam install on our house, about 2,200 square feet, and I was honestly surprised at how quiet and tidy the crew was. No nail piles in the yard, no dents in the siding. Couldn't be happier.”
Standing Seam Metal Roofing
“They came out to fix a ventilation issue on our green metal roof and ended up re-sealing some flashing while they were up there. Fair price, showed up when they said they would, and explained everything before doing it.”
Metal Roof Repair
“We went with the retrofit over our old shingles instead of a full tear-off and I'm so glad we did. Springfield Metal Roofing handled the whole thing in under a week and the house already feels cooler. The crew even walked me through the trim details at the end.”
Metal Roof Over Shingles (Retrofit)
“Had a leak around the chimney that two other outfits couldn't track down. These guys found it in an afternoon, replaced the flashing and a handful of screws, and we haven't had a drop since. Grateful is an understatement.”
Metal Roof Leak Repair
“New metal roof on our house and the whole process from quote to cleanup was smooth. They protected the landscaping, hauled off every scrap, and the finished roof looks sharp from the street. Only wish the scheduling window had been a little tighter.”
Metal Roof InstallationReal photos of our work in Springfield · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated and ribbed panel install | Starting at $8/sq ft | Includes tear-off, synthetic underlayment, standard trim and cleanup on an accessible single-story roof. |
| Standing seam install | Starting at $12/sq ft | Concealed clips and raised seams; price rises with roof pitch, panel gauge and trim complexity. |
| Stone-coated steel or metal shingle install | Starting at $14/sq ft | Includes granular or stamped panel systems, new flashing and ventilation detailing. |
| Deck repair or sheathing replacement | On estimate | Priced per sheet after tear-off reveals soft spots; common on 1920s bungalows with layered shingles. |
| Travel | Included | In Springfield and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (417) 815-6442, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Snap-lock standing seam | Starting at $10/sq ft | Includes concealed-fastener panels and standard trim; simple gable roofs stay near the low end. |
| Mechanically seamed panels | Starting at $13/sq ft | Includes double-lock seaming for high wind uplift; steep gables and complex hips move the price up. |
| Tear-off and deck repair | On estimate | Removing multiple old layers and replacing soft sheathing needs an on-site look before pricing. |
| Roll-formed on-site panels | On estimate | Long runs on farmhouses and shops need exact measurements to form panels to length. |
| Travel | Included | In Springfield and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (417) 815-6442, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener panel replacement | Starting at $9/sq ft | Includes tear-off, deck inspection, underlayment, and basic flashing on a simple gable roof. |
| Standing seam replacement | Starting at $14/sq ft | Concealed fasteners, raised seams, and premium detailing; price rises with pitch and roof complexity. |
| Stone-coated steel or metal shingle replacement | Starting at $13/sq ft | Impact-resistant finish and shingle or tile look; steeper roofs and multiple valleys push the rate up. |
| Complex or large-scale job | On estimate | Multiple layers, rotted decking, historic district review, or complex flashing need an on-site look first. |
| Travel | Included | In Springfield and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (417) 815-6442, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener panel retrofit | Starting at $7/sq ft | Includes slip sheet, underlayment and basic flashing; low-pitch ranch roofs price near the low end. |
| Standing seam retrofit | Starting at $11/sq ft | Concealed-fastener panels over existing shingles; steep gables and dormers push the rate up. |
| Stone-coated steel retrofit | Starting at $10/sq ft | Granulated steel tiles over the old layer; complex hips and valleys add labor and trim. |
| Deck repair and sheathing replacement | On estimate | Soft sheathing and rot need an on-site look before we price the square footage involved. |
| Travel | Included | In Springfield and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (417) 815-6442, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Flashing reseal or minor repair | Starting at $450 | Covers one penetration or a small flashing reseal, priced up by access and roof pitch |
| Single panel replacement | Starting at $650 | Includes matching panel, seam reseal, and water test, priced up by panel length and height |
| Screw replacement and re-fastening | Starting at $1,800 | Full-field screw and washer replacement, priced up by roof square footage and panel count |
| Chimney or skylight flashing rebuild | Starting at $900 | New metal flashing and sealant at one penetration, priced up by curb complexity and access |
| Large or storm-damaged scope | On estimate | Multiple panels, widespread fastener failure, or hidden deck damage needs an on-site look first |
| Estimate | Free | Response within 24 hours at (417) 815-6442, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single traced leak repair | Starting at $450 | Includes inspection, water test, fastener or flashing fix and retest; access and pitch move the price up |
| Fastener and washer replacement | Starting at $650 | Covers pulling and resetting failed screws with new washers on one panel run; roof height affects labor |
| Flashing or penetration rebuild | Starting at $850 | Includes chimney, skylight or pipe boot flashing rebuild; number of penetrations increases the scope |
| Panel or section replacement | On estimate | Hail-punctured or storm-torn panels need an on-site look to match profile, color and deck condition |
| Emergency tarping | Starting at $350 | Secures an active leak after a storm; same-day availability depends on call volume and weather |
| Travel | Included | In Springfield and surrounding areas, no separate call-out or mileage fee |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Targeted screw replacement | Starting at $750 | Covers pulling and replacing scattered failed fasteners with new UV-rated washers on a typical single-story roof. |
| Oversized fastener retrofit | Starting at $1,150 | Includes oversized screws for stripped holes and sealing, priced by fastener count and roof pitch. |
| Full re-fastening pattern | Starting at $1,900 | Replaces every fastener on the roof field, priced by square footage, pitch, and panel profile. |
| Complex or large-scale job | On estimate | Steep gables, two-story homes, and commercial or agricultural roofs need an on-site look before pricing. |
| Travel | Included | In Springfield and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (417) 815-6442, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof, simple ranch | Starting at $5.50/sq ft | Includes tear-off, underlayment, panels and trim on a straightforward single-story gable. |
| R-panel or 5V roof, shop or barn | Starting at $6.25/sq ft | Includes closures, ridge and eave trim, priced by square footage and penetration count. |
| Two-story home with complex roof | Starting at $7.50/sq ft | Adds access, safety setup and extra trim work on steep or cut-up roof lines. |
| Re-fastening and panel repair | Starting at $450 | Replaces backed-out screws, washers and damaged panels on an existing metal roof. |
| Complex or large-scale job | On estimate | Deck rot, historic review or unusual access needs an on-site look before we quote. |
| Estimate | Free | Response within 24 hours at (417) 815-6442, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stamped painted steel shingle | Starting at $9/sq ft | Includes tear-off, underlayment and install; steep pitch or tight access raises the rate. |
| Stone-coated steel shingle | Starting at $11/sq ft | Includes mineral-coated panels and trim; roof complexity and valley count move the price. |
| Slate or shake profile system | Starting at $13/sq ft | Includes premium profile and concealed fasteners; historic district review can add lead time. |
| Multi-layer tear-off and deck repair | On estimate | We need to see the deck and layer count before quoting rotten sheathing and valley rebuilds. |
| Travel | Included | In Springfield and surrounding Greene County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (417) 815-6442, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel installation | Starting at $9/sq ft | Includes panels, underlayment, standard flashing and labor on a straightforward Springfield roof. |
| Retrofit over existing shingles | Starting at $8/sq ft | Covers one existing shingle layer where code allows, saving tear-off cost and landfill fees. |
| Full tear-off and replacement | Starting at $11/sq ft | Adds deck repair, full underlayment and disposal when old layers or rot require a strip. |
| Complex roof or steep pitch | On estimate | Multiple gables, valleys, dormers or steep pitches need an on-site look before a number is given. |
| Travel | Included | In Springfield and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (417) 815-6442, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper accent and flashing | Starting at $20/sq ft | Includes soldered copper valleys, chimney flashing and porch or bay window caps, priced by the square foot of metal. |
| Full architectural copper roof | Starting at $28/sq ft | Includes standing seam or flat-seam copper over the full roof, with custom fabrication and soldered details. |
| Zinc and aluminum accents | Starting at $16/sq ft | Includes porch roofs, dormers and entry caps in zinc or aluminum, a lower-cost specialty metal option. |
| Custom fabrication and repair | On estimate | Needs an on-site look because matching existing copper or zinc details depends on the profile and condition. |
| Travel | Included | In Springfield and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (417) 815-6442, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Light chalk, sound panels | Starting at $2.50/sq ft | Includes wash, light rust treatment, and two coats on a clean roof. |
| Moderate rust and fastener wear | Starting at $3.50/sq ft | Adds rust conversion, spot priming, and replacement of failed fasteners. |
| Heavy rust or steep access | On estimate | Staging, rope access, and deep rust work need an on-site look first. |
| Travel | Included | in Springfield and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (417) 815-6442, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single skylight curb flashing repair | Starting at $600 | Includes removal of old flashing, new bent curb cap and water test; height and pitch move the price. |
| Chimney step and counter flashing rebuild | Starting at $950 | Covers cut reglet, new step and counter flashing and sealing; brick condition and chimney height affect cost. |
| Valley or dormer transition rebuild | Starting at $800 | Includes new bent valley pan or sidewall flashing with proper laps; roof pitch and access drive the number. |
| Complex or multi-point flashing job | On estimate | Chimney plus skylights plus valleys on one roof needs an on-site look before we quote a firm price. |
| Emergency leak response | On estimate | Same-week tarping and diagnosis carry a premium; the repair quote follows once we trace the entry point. |
| Estimate | Free | Response within 24 hours at (417) 815-6442, no obligation to book the repair. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Guard rows over main entries | Starting at $1,200 | Includes guard rows above primary entries plus edge and ridge fastening check on one elevation. |
| Full perimeter guard run | Starting at $2,400 | Covers every shedding elevation, with clamp-on or surface-mounted guards matched to the panel profile. |
| Edge and ridge reinforcement only | Starting at $1,200 | Heavier edge metal and denser ridge fastening for wind uplift, no guards included. |
| Steep or two-story access | On estimate | Steep gables and two-story elevations near Drury and Rountree need staging and fall protection priced on site. |
| Travel | Included | In Springfield and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (417) 815-6442, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof, attic and gutter inspection with photo documentation and a written repair versus replacement recommendation. |
| Minor repair (fasteners, seams, flashing) | Starting at $350 | Covers a small number of lifted screws or seams, with price rising by count and roof pitch. |
| Panel or section replacement | Starting at $900 | Includes matching panel profile and color, with price driven by panel count and access. |
| Insurance documentation packet | Included with repair | Photos, measurements and storm details prepared for your claim at no extra charge. |
| Travel | Included | In Springfield and surrounding towns, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (417) 815-6442, no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Residential metal roof inspection | Free estimate | Full panel, seam, fastener and flashing walk with written photo report included |
| Steep or tall roof inspection | Starting at $250 | Anchored or drone survey for steep gables and two-story subdivision homes |
| Insurance claim documentation | Starting at $300 | Hail and wind damage report formatted for claim review with indexed photos |
| Complex or large-scale roof | On estimate | Multi-plane, mixed-panel or commercial roofs need an on-site look first |
| Travel | Included | in Springfield and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (417) 815-6442, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless aluminum gutter, 5 or 6 inch | Starting at $9/linear ft | Includes on-site forming, standard hangers, and basic downspout placement on a single-story run. |
| Standing seam with seam-clamp hangers | Starting at $14/linear ft | Clamp-on brackets keep the panel warranty intact and add labor over standard fascia hangers. |
| Leaf protection and oversized downspouts | Starting at $6/linear ft added | Screens for oak and hickory debris, plus larger leaders to handle spring cloudburst volume. |
| Complex or large-scale job | On estimate | Steep gables, second-story access, and long runs need an on-site look before we quote. |
| Travel | Included | In Springfield and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (417) 815-6442, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Roof inspection and written estimate | Free | On-site look at purlins, deck, flashings, and drainage, with a written scope and no obligation |
| Repair and re-fastening | Starting at $450 | Replace screws and washers, reseal laps, and swap damaged panels; price moves with roof height and panel count |
| Exposed-fastener reroof | Starting at $3.50 per sq ft | New ribbed panels and closures over a sound deck; purlin spacing and removal of old roofing move the rate |
| Standing seam commercial roof | On estimate | Low-slope commercial and church roofs need an on-site look at deck, slope, and flashing details first |
| Insulated panel system | On estimate | Poultry and livestock buildings need panel thickness and venting sized to the building before pricing |
| Travel | Included | In Springfield and surrounding Greene County areas, with no separate call-out or mileage fee |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Springfield want a crew that understands what local roofs actually face: steep gables on Victorian and Craftsman homes, heavy oak and hickory canopy, high-elevation wind exposure, and a large stock of aging screw-down roofs whose fasteners are backing out. Springfield Metal Roofing is the local name for metal roof installation, replacement, re-roof, and repair across Springfield, Nixa, Ozark, Republic, Willard, and the surrounding Ozark hills. From 1920s brick bungalows near Brookside to newer subdivision homes in Christian County, we match the system to the structure.
Our network of licensed, insured local contractors handles everything from standing seam on a steep historic home to corrugated panels on a barn or lake cabin. We work on the Springfield Plateau, where thin rocky clay over limestone, spring hail, and freeze-thaw winters punish roofing. If you need straight guidance on repair versus replacement, start with a free estimate.
Most metal roof leaks in Springfield trace to a short list of failures. On 15 to 30 year old exposed-fastener roofs, the number one cause is fasteners backing out as their EPDM sealing washers dry, shrink, and crack, letting water past the screw head. Thermal movement, the daily expansion and contraction of panels in bright summer sun and cold winter light, can work screws loose and separate seams. Failed pipe boots and flashing at chimneys, skylights, and valleys are the next most common entry points. After tornado-season wind, panels can lift or peel; after a limb falls, punctures open the panel.
Ignoring a small leak is expensive. Water tracks along purlins and decking far from the entry point, so by the time a stain shows inside, sheathing may be rotted and insulation soaked. That is why we trace the source, not just the symptom. Our Metal Roof Leak Repair team finds the actual failure, and our Screw Replacement & Re-Fastening service often restores a watertight roof for a fraction of replacement cost when panels and washers are otherwise sound.
The honest call between repair and replacement depends on panel condition, fastener age, and how many failures are active. If a full screw replacement with new sealing washers and proper torque will stop the leaks, we say so. If seams are failing across the roof or panels are thin from corrosion, replacement is the better long-term spend. Call (417) 815-6442 to talk through what you are seeing, or request a free estimate.
We install the full range of metal systems, and we match the system to the home rather than the other way around. Standing Seam Metal Roofing uses concealed clips and no exposed fasteners, which makes it the premium choice for steep gables and long-term durability. Corrugated & Ribbed Panel Roofing is the economical workhorse for cabins, barns, shops, and agricultural buildings. Metal Shingle Roofing and Stone-Coated Steel Roofing suit homeowners who want a traditional look with hail resistance, while Copper & Specialty Metal Roofing handles accents and historic profiles.
The trade-off is simple: standing seam costs more up front and has no exposed screws to maintain, while screw-down costs less and needs fasteners serviced over its life. Metal Roof Over Shingles (Retrofit) is a legitimate option when the deck is sound and local code allows it; when the deck is not, tear-off is the right call. We walk you through both before you commit.
Metal roof projects are typically quoted per square foot for installation, while repairs are often flat-rate. Price depends on the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access. Some carriers may offer premium discounts for metal or impact-rated roofs, but that is between you and your insurer. Final pricing depends on the roof and site conditions, so we quote after inspection, not over the phone.
For typical ranges and what drives them, see our pricing page. Then request a free estimate or a free roof inspection so we can give you a real number for your home.
After storm or hail damage, we inspect and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise a claim will be approved. On permits, in most jurisdictions a permit is commonly required for a full replacement or re-roof, but requirements vary by city, and fees and inspection requirements differ. We do not state thresholds or layer limits as fact because they change by jurisdiction. Historic district or HOA design review can also affect panel profile and color choices, so plan for that early.
Requirements vary. Always verify with the Springfield building or planning department before starting your project. For help documenting conditions or planning a scope, contact us.
Ready to get started? Springfield Metal Roofing serves in Springfield and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Springfield · Response within 24h · No commitment · ☎ (417) 815-6442
Your Free Quote Request