Serving the Springfield area  ·  (417) 815-6442  ·  Open Mon-Sun 7am-7pm
📞 (417) 815-6442 Free Quote

Metal Roofing in Springfield, MO (65897) · Local Professionals

Springfield Metal Roofing · Fast response in Springfield and the Springfield area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+196Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Springfield's mix of 1920s brick bungalows, steep-gabled Craftsman homes near Drury and Rountree, and low-slung 1960s ranches out toward Southern Hills means one thing for roofs: they take a beating. Between spring hail, tornado-season wind, and humid Ozark summers, shingles age fast on these tree-lined streets.

Homeowners in Springfield (65897) call Springfield Metal Roofing because we know the local housing stock and the weather that hits it. From the Victorian and Queen Anne homes around Phelps Grove to the newer subdivisions in Nixa and Ozark, we install, repair, and replace metal roofs built for this climate. We're fully insured, and we treat every property like it's in our own neighborhood.

Metal Roofing in Springfield (65897)

Springfield sits on the Springfield Plateau, where thin rocky clay soil over limestone creates sinkholes and karst features that can affect drainage and foundation stability. On steep gables in older neighborhoods like Rountree and Phelps Grove, access is tight and roof pitches are aggressive, so we plan staging carefully to protect landscaping and siding. In the brick ranches across Galloway and Sequiota, low-pitched roofs often have multiple layers of old shingles, and we check code limits on recover before recommending a retrofit. The humid summers and freeze-thaw winters here also mean ice damming at the eaves is common on higher-elevation homes, so we pay close attention to attic ventilation and underlayment.

Our team has worked on everything from 1880s Victorian roofs near Drury to modern standing seam installations in Willard and Republic. We understand how hail impacts different metal profiles and how wind-driven rain can find gaps in flashing around chimneys and skylights. That local experience means fewer callbacks and roofs that hold up through tornado season.

Our services in Springfield

How a Job Works in Springfield

Step 1: Call us at (417) 815-6442 or request a free on-site assessment. We'll inspect your roof, check for hail damage, wind-lifted panels, or active leaks, and review your options with clear pricing. If your home is in a historic district or HOA, we'll note any design review requirements early.

Step 2: Once you approve the scope, we schedule the work and handle permit coordination with the City of Springfield. On tight lots in older neighborhoods, we plan material delivery and staging to avoid blocking streets or damaging mature trees. For retrofits over existing shingles, we verify code limits on layers before proceeding. Our crews are trained on standing seam, corrugated panels, stone-coated steel, and metal shingles, and we use fasteners and sealants rated for local temperature swings.

Step 3: After installation or repair, we clean the site thoroughly, haul away all debris, and walk the roof with you to confirm everything meets your expectations. We leave your property clean and provide documentation for insurance claims if storm damage was involved.

Metal roofing in Springfield varies by material and complexity. Corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof installation from $8 per square foot, standing seam from $10, and stone-coated steel or metal shingles from $9. Repairs like leak fixes start at $450, screw replacement and re-fastening at $750, and flashing or chimney repair at $600. A full replacement typically runs $9 per square foot, while a retrofit over existing shingles starts at $7. Key cost factors include roof size, pitch, access, number of penetrations, and whether storm damage requires urgent repairs. Call (417) 815-6442 for a free estimate tailored to your Springfield home.

My 1920s bungalow in Rountree has a steep gable and only street parking. Can you still install a metal roof?
Yes. We work on tight lots in Rountree and Phelps Grove regularly. We plan staging in advance, use compact equipment where needed, and protect landscaping and neighboring properties. Steep pitches require extra safety measures, but our crews are trained for them.
How fast can you respond to storm damage in Springfield?
We prioritize emergency calls after storms. Call (417) 815-6442 and we'll schedule an inspection as soon as possible, often within 24 to 48 hours depending on demand. We provide free inspections and documentation for insurance claims.
What does a typical metal roof replacement cost in Springfield?
Most full replacements start around $9 per square foot, but the total depends on roof size, pitch, access, and material choice. Standing seam runs about $10 per square foot, while corrugated panels start at $5.50. We give you a detailed estimate after an on-site assessment.
Do I need a permit for a metal roof in Springfield?
Permits are commonly required for full replacements and re-roofs, and requirements vary by jurisdiction. We handle permit coordination and can help you understand local rules. For official information, check the City of Springfield website at https://www.springfieldmo.gov/ or contact the building department directly.
My HOA requires a specific roof color. Can you help with approval?
Yes. We provide material samples and documentation to submit to your HOA. If your home is in a historic district, we can also coordinate with the design review board. We'll make sure the panel profile and color meet local guidelines before ordering materials.
Are you fully insured for work on my Springfield property?
Yes. Springfield Metal Roofing carries general liability and workers' compensation insurance. We're happy to provide certificates of insurance upon request so you can verify coverage before work begins.
What maintenance does a metal roof need in Springfield's climate?
Check fasteners and sealant annually, especially after hail or high winds. Clear debris from gutters and valleys to prevent ice damming in winter. We offer inspections and maintenance plans to keep your roof performing through Ozark summers and freeze-thaw winters.
Why choose us?

Trusted professionals in Springfield

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Springfield

All your work handled by qualified professionals in Springfield

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

196+ Verified Client Reviews in Springfield

⭐⭐⭐⭐⭐ 4.9/5 · 196 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Springfield · Response within 24h · No commitment · ☎ (417) 815-6442

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Springfield ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm